How to Insulate behind your Radiators
Difficulty: Easy • 7 stepsMethod steps
1. Measure your Radiator

Start by using a tape measure and measuring from one end of the radiator to the other. You want the insulation to cover as much of the width of the radiator as possible. Just ensure you don't measure over, as you will be able to see the insulation if so at the sides.
2. Roll The Insulation Out and Mark

Roll the insulation out and mark the measurement you have just taken.
3. Cut the Radiator Insulation

Where you have marked, draw a straight line and cut all the way so you have a piece that is perfect to size.
4. Mark where the Radiator Brackets Sit

Prior to removing the backing off the double sided tape, hold the insulation above the radiator as if you were about to install it. Instead, just mark the place where the radiator brackets sit.
5. Cut to allow for the Radiator Brackets

Cut the insulation, where you have market it to allow for the insulation material to slot over the radiator brackets comfortably.
6. Apply the Double Sided Tape

Apply and then peel the backing off the double sided adhesive tape. Place behind the radiator. When neatly in place, then put a little pressure where the tape sits so it holds securely in to place.
7. Install Complete

You can now enjoy more of the heat you generate! It will no longer escape directly behind.
Disclaimer - Ecohome-Insulation cannot be held responsible for any losses financially or physically from advice provided in this How-To-Guide.
Request a callback
Basket |
Contact us
Delivery info