How to Install FloorQuilt

If you have a solid floor, FloorQuilt can be used to improve the thermal performance. It is also perfect for those who intend to have a hot water underfloor heating system installed too.

You can insulate and improve the thermal performance of your solid floor in new builds or renovation projects in just a few short steps, using FloorQuilt. This is a really easy product to install and is commonly installed alongside underfloor heating systems too, as it improves energy efficiency.

Ensure the Floor Is Clean and Free from Debris

Ensure there's no dirt so nothing is trapped beneath, and no bumps.

Lay YBS FloorQuilt Onto the Solid Floor

Start at the wall edge and ensure that the FloorQuilt overlaps the wall edge by a minimum of 100mm.

If you need to cut the FloorQuilt, you can do so easily with either our multifoil insulation scissors or our cutting knife, available in the multifoil fitting kit.

Butt Joint

When installing the next layers, ensure the material is butt jointed up to the previous layer.

Use ThermaSeal Foil Joining Tape to cover the joints where they meet.

Install Screed / Underfloor Heating

If you are not installing underfloor heating, you should now move on to the screed, in accordance with the manufacturer's instructions.

If you are installing underfloor heating, we advise using the gridded outer membrane on the FloorQuilt to help you install the hot water piping.

Any questions at all, just get in touch here. You can either submit an enquiry or request a call-me-back — we are more than happy to assist you.

Disclaimer – Ecohome Insulation cannot be held responsible for any losses financially or physically from advice provided in this How-To-Guide.