How to Install the EcoTec Radiator Insulation Kit

In this how-to guide, we'll show you how to install the EcoTec Radiator Insulation Kit to save on energy bills. This is a fast and cost-effective way of maximising the performance of your radiators within your home.

Did you know around 40% of energy from radiators can be lost through the walls? This is why it's vital to insulate behind them.

Measure

Measure the length of the radiator using a tape measure.

Mark the Insulation

Roll out the insulation and mark the correct length you've just measured.

Cut the Insulation

Use multifoil insulation scissors or a cutting knife to cut the insulation at the length you've just marked out.

Radiator Brackets

Measure the length of the brackets and mark their placement onto the insulation, as well as the length of the brackets. Cut the lines you've just marked so the insulation fits around the radiator brackets.

Tape

Apply the ThermaSeal double-sided tape to the top and bottom of the back of the insulation, then peel off the backing.

Secure the Insulation

Place the insulation behind the radiator and adhere the ThermaSeal double-sided tape to the wall.

Disclaimer – Ecohome Insulation cannot be held responsible for any losses financially or physically from advice provided in this How-To-Guide.